With its generous size and regal curved legs, the French Rectangular Dining Table enhances the elegance of your dining room. This dining table is made of solid cherry wood and veneer and is available in an assortment of warm, antiqued finish options with a topcoat of catalyzed lacquer to protect against spills. This dining table features a center lever top lock mounted beneath so a simple movement of the handle unlocks and moves the two halves apart. When closing, a turn of the handle draws the two halves together. It comes with one 18-inch interlocking leaf with aprons for a secure fit and proper alignment of the top. This handsome dining table seats six people without the leaf and eight people when fully extended. The overall dimensions are 60 inches long, 36 inches wide, and 30 inches high. With the leaf in, the table extends to 78 inches long.
Proudly Handcrafted
This item is handcrafted in a way few products are today. Master craftsmen hand-assemble each piece, using wooden dowels, tenon joinery, and other traditional methods to ensure the highest quality. Each item then undergoes a meticulous 16-step finishing process (read more about this process below) - all done by hand - resulting in a unique piece with incredible depth and beauty. From hand-rubbing with steel wool and oil, to physically distressing pieces for certain antiqued finishes, the item doesn't leave the company until it has been crafted with care, then thoroughly inspected and proudly sent to you, to enjoy for years to come.
See More Details 
The Unique 16-step Finishing Process
1. Case clean - hand-sanding of item.
2. Stain - spray on non-grain-raising stain for foundation.
3. Seal - spray on clear lacquer.
4. Sealer sanding - hand-sand with very fine grit sand paper.
5. Distressing - for finishes requiring distressed look, hand applied physical nicks, worm holes and worn edges.
6. Glaze - spray on dark tone.
7. Wipe - hand-wiping wet glaze off, leaving residue in pores.
8. Highlight - glazing that creates light and dark areas to accent grain.
9. First top-coat - spray on clear coat of lacquer.
10. Hand-sand.
11. Dry brush - applying thick glaze to edges to provide antique, mellow aged appearance.
12. Spatter - dark material applied with gun for spattered look.
13. Second top-coat - spray on clear coat of lacquer for more depth and protection.
14. Hand-sand.
15. Rub - hand-rubbing with very fine steel wood and oil for extra smoothness.
16. Polish - hand-applied polish and buffing for final gloss finish.
